Motion Control Systems

HOME > Products > Motion Control Systems > Label Printer

・By digital connection of all equipment by link, ambiguity like analog circuit is lost and system reproducibility is high.In the case of a machine configuration that becomes long especially from the upstream to the downstream, the link wiring has a big effect on saving wiring.

・Traditional rotary cutters start and stop at every cut. Motor capacity increases. However, the rotary cutter in the above machine controller system keeps rotating without starting or stopping due to the special cam pattern (cutter may rotate in the reverse direction as well).

• Motor load current can be reduced by approximately 20% for an increase in energy savings. The motor frame can be one size smaller when certain conditions are met.

• High-accuracy cutting (±0.1mm) with the ultrafast computation (scanning time: 2.0ms)

Motion Control Systems 

Products

Copyright(C)  HAGA ELECTRIC Ltd. All Rights Reserved. 
pagetop